Product categories

Cisco Catalyst 1300 10-port SFP+, 2x10GE/SFP+ Shared

33 803 CZK 27 937 CZK without VAT

Unknown availability

Code: NAPCSC1306 PN: C1300-12XS Warranty: 24 months
Výrobce: CISCO
 (Cisco Systems International BV)
Haarlerbergpark, Haarlerbergweg 13-19, Amsterdam, Nizozemsko
web-help@cisco.com
www.cisco.com
Cisco Catalyst C1300-12XS High-performance 10-gigabit Ethernet switch for branch offices and small to medium-sized businesses. The Cisco Catalyst 1300-12XS switch... more

Cisco Catalyst C1300-12XS

High-performance 10-gigabit Ethernet switch for branch offices and small to medium-sized businesses.

The Cisco Catalyst 1300-12XS switch represents an advanced solution for network infrastructure with 10× 10 Gigabit SFP+ ports and 2× combo 10G RJ-45/SFP+ ports. The device is equipped with Layer 3 routing supporting up to 7,168 IPv4 routes and 256 IP interfaces, enabling network segmentation and efficient traffic routing without the need for an external router.

The switch runs on a proprietary Linux operating system and is managed through the intuitive Cisco Business Dashboard or mobile application. It supports front-panel port stacking of up to eight units with a switching capacity of 240 Gbps and performance of 178.57 Mpps. To ensure long-term reliability under full 10G load, it features quiet active cooling.

  • 10× 10 Gigabit SFP+ and 2× combo 10G RJ-45/SFP+ ports for flexible connectivity
  • Layer 3 routing with RIP v2, static routing, and up to 7,168 IPv4 routes support
  • Physical stacking of up to 8 switches with unified management and IP address
  • Advanced security with IEEE 802.1X, ACL (2,048 rules), DHCP snooping, and Dynamic ARP Inspection
  • Management via Cisco Business Dashboard with embedded probe or through CLI and SNMP
  • Quiet operation with active cooling (1 fan) and low power consumption (11.5 W in idle mode)
  • Support for Energy Efficient Ethernet (IEEE 802.3az) and automatic port shutdown on link down
  • Dual image firmware for safe updates with minimal downtime

Network Features and QoS
The switch supports 4,094 VLANs, IGMP snooping for up to 4,000 multicast groups, Spanning Tree Protocol (STP, RSTP, MSTP, PVST+), and Link Aggregation (LACP) with up to 8 groups. QoS provides 8 hardware queues with support for strict priority and WRR scheduling, DSCP/CoS remarking, and rate limiting.

Security and Authentication
Advanced security features include IEEE 802.1X authentication with RADIUS/TACACS+, port security, IP Source Guard, Dynamic ARP Inspection, and IPv6 First Hop Security. The switch supports SSH v1/v2, SSL/HTTPS, and ACL with up to 2,048 rules for traffic filtering based on MAC, IP, VLAN, protocol, and ports.

Management and Monitoring
Management is available through Cisco Business Dashboard with embedded probe, web interface (HTTP/HTTPS), CLI (Telnet/SSH), SNMP v1/v2c/v3, or Cisco Network Plug and Play. The switch supports RMON, syslog, port mirroring (up to 8 sources to 1 destination), sFlow, and cable diagnostics.

Stacking and High Availability
Physical stacking via front-panel ports allows connecting up to 8 switches into a single logical unit with unified management. The stack provides unified data and control plane, supports cross-stack LAG, QoS, VLAN, and port mirroring. In case of master unit failure, fast failover to standby unit occurs.

BASIC SPECIFICATIONS

Ports: 10× 10G SFP+, 2× 10G RJ-45/SFP+ combo, 1× Gigabit Ethernet management
Console ports: 1× USB-C, 1× RJ-45
USB ports: 1× USB 2.0 (for firmware, configuration, USB flash)
Stacking capability: up to 8 switches
Switching capacity: 240 Gbps
Throughput: 178.57 Mpps (64B packets)
MAC table: 32,000 addresses
VLAN: up to 4,094 active VLANs simultaneously
Memory: 1 GB DDR4 RAM, 1 GB SLC Flash
Processor: dual-core ARM 1.5 GHz
Buffer memory: 3 MB
Power supply: 100–240 V AC, 50–60 Hz (internal power supply)
Power consumption: max. 26.1 W, idle 11.5 W
Cooling: 1 fan, acoustic noise 29.5 dBA at 25 °C
Dimensions: 300 × 268 × 43.94 mm
Weight: 2.67 kg
Operating temperature: –5 to +50 °C
MTBF: 1,226,587 hours at 25 °C
Certifications: UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A

Brand
Type specification :  Switch
Manufacturer :  CISCO
Technical specification
Fanless :  no
Homologation EN50155 :  no
Switching capacity (Gbps) :  240
Management :  yes
PoE-in :  no
PoE-out :  no
Outdoor use :  no
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -5
Placement :  rack
Switch throughput (Mpps) :  178,57
Stackable :  Hardware stack
OSI layer :  L3 dynamic
Display
Display :  no
Network interfaces
Gigabit LAN :  yes
Port Speed :  10 Gb/s
Inputs and outputs
RJ-45 :  2
RJ-45 console/management :  2
RS-232 :  no
SFP+ :  12
USB 2.0 :  1
Card reader
MicroSD card support :  no
Power supply
Power type :  internal power supply
PoE support :  no
Input Voltage (V) :  100 - 240 (AC)
Physical properties
Color :  white
Weight (g) :  2670
Dimensions :  300 × 268 × 43,94 mm
Additional equipment and features
Certification mark :  UL (UL 62368), CSA (CSA 22.2), CE, FCC Part 15 (CFR 47) Class A
Warranty
Warranty period EU (months) :  24
Warranty period CRN (months) :  24
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll